By slots in flange option r appropriate clips for servo mount option. The sensor should be mounted with minimal axial and radial loading on the shaft for optimum life. It is recommended that the shaft is coupled to the drive using a flexible coupling.
The sensor has full rotational freedom and two sectors. 180° apart, over which linear response can be achieved. At the mid point of the calibrated range the output signal will be 2.5V and the flat on the shaft is aligned with the registration mark in the base of the sensor. In the calibrated range the output increases as the shaft is rotated in an anti-clockwise direction viewed from the shaft. The calibrated output is set to between 30 and 140°.
Incorrect Connection Protection Levels – The sensor is not protected against either reverse polarity or over-voltage.The risk of damage should be minimal where the supply current is limited to less than 50mA.
Angle Transmitter brochure